GUIDE 03

How to read a cut plan without losing a part.

The plan communicates a found layout, not a certified fabrication order.

01 / Start with the scenario

Check whether the plan uses offcuts, new sheets, or a mix. Read coverage, pending parts, and additional cost together: €0 with pending parts does not finish the project.

02 / Trace each ID

Every placed part retains its ID and dimensions. ROTATED 90° means width and height were swapped to fit; check grain, finish, and visible face before cutting.

03 / From browser to workshop

Download the self-contained SVG per sheet to inspect geometry and dimensions. Print the A4 report from the browser or save it as PDF. Verify physical dimensions, kerf, clamping, cut order, and safety: this is indicative output, not CNC.

N1 / 1220 × 2440 mm

LATERAL-1720 × 280 mm

BALDA-1560 × 280 mm

UNUSED AREA ≠ REUSABLE OFFCUT

Explanatory diagram, not an exportable plan. In the comparator, use the real SVG/PDF dimensions and cut list.

Test the decision with your dimensions.Back to the comparator →